Sunday, September 19, 2021

Standard SATA AHCI Controller Update – Everything You Need To Know

Must read

mm
Aniket Jain
Hi there, My self Aniket Jain. A virtual SEO expert, content writer, and digital marketer. Works with lots of passion, hardly dedicated to what's best and what's next ✌️. Hope u all like my work ✌️

If you need your computer to work properly, you need to install all the drivers on your computer properly. You need to do this to make all the components work finely, which are not natively handled by Windows 10.

Windows 10 does not handle all the components of your computers. Some components need to use their own drivers to function properly. That is why you need the drivers properly installed on your computer. One of them is the Standard SATA AHCI Controller.

Your storage disk, which you called as the hard disk, is connected to your computer through Standard SATA AHCI Controller Drivers.

Every driver needs to be updated regularly to make it function properly. It is applicable to Standard SATA AHCI Controller Drivers too. Here in this article, you will know everything about the Standard SATA AHCI Controller Update.

Standard SATA AHCI Controller Update

Standard SATA AHCI Controller Update

SATA stands for Serial Advanced Technology Attachment. AHCI means Advanced Host Controller Interface. This is the key component that connects Windows 10 system with the SATA technologies. It helps in communicating through the motherboard that reads the AHCI protocol and processes data that travels in between the two ends.

But before you know about the standard SATA AHCI controller driver update, you need to know what is a Standard SATA AHCI Controller.

What Is A Standard SATA AHCI Controller?

It is the way of how you control AHCI based storage drives connected to the computer via the BIOS interface of the system. SATA AHCI Controllers give you a better knowledge of the hard disk and stored files and helps you to get faster transfer speed for large files.

It is the key component that helps your hard drive to function properly. That is why you need to be extra careful when you are going to download and update your Standard SATA AHCI Controller Driver. You need to take care of a few things.

How To Update SATA AHCI Controller Driver?

Here is a complete list of what you need to know before download and installing the Standard SATA AHCI Controller Driver Updates.

1.Check Your Processor

Whether the update will work on your computer or not depends on the processor type of your PC. Don’t forget to check the processor type before downloading the updates by following the steps below.

  • Open Settings.
  • Go to System.
  • Go to About.
  • Check Device specifications to know what type of processor your PC use.

2.Download The Driver Updates

You have to now download the updates. Download the appropriate updates for your AMD or Intel processor from the appropriate sites.

3.Install the Updates

Now you have to install the updates. In two ways you can perform this task.

To install the updates automatically, you can double-click on the latest downloaded .exe file. This will help you in installing the updates automatically.

But if it does not work, you can follow the steps below to install the updates.

Standard SATA AHCI Controller Update
  • Launch Run by pressing Windows Key + R.
  • Type devmgmt.msc and Press Enter.
  • Expand the category called IDE ATA/ATAPI controllers. Find your SATA controllers.
  • Right-click on every file listed on both of the sides and click on Update Driver.
  • Click Search automatically for updates. If this is not working for you, you can take the other option of manually locating the drivers that you downloaded earlier.
  • It will download and install the drivers automatically once it is found.

4.Download Standard SATA AHCI Controller Drivers Windows 10

Basically, it has nothing to do with what Operating System you use. The Standard SATA AHCI Controller Driver Update depends totally on the processor type you use for your computer. So before downloading, you need to be sure about the type of processor in your computer.

Here we are providing another way to know about what type of processor you use in your computer if you already do not know that.

  • Right-click on the This PC icon on your PC screen.
  • Click on Properties.
  • A new page will open. You can find the processor type of your computer here in this page.

How To Update SATA AHCI Controller Driver?

You need to go to the appropriate sites in order to download the driver. These sites are different for AMD and Intel processors. That is why you need to know what type of processor you use. Because Intel driver updates won’t work on AMD processors.

Now find the .exe file you downloaded. Now you can either double-click on it to start the installation, or you can follow the following steps.

  • Type in Device Manager in the Search text box.
  • Open Device manager.
  • Find IDE ATA/ATAPI controllers from the list. Expand it.
  • Right-click on the driver and click on Update driver for further process.
  • You can either select Automatically search for updates to search the update on internet, or you can manually locate the previously downloaded drivers in your computer. Once it is found, the download and installation will start automatically.

Should I Use Standard SATA AHCI?

If you want to optimize both the handling of SSD and HDD solutions by the Native Command Queuing, you can use Standard SATA AHCI. It will give you a better understanding of your storage space and gives faster transfer speed for larger files.

How Do I Install AHCI Drivers On Windows 10?

Here are the steps of installing AHCI Drivers on Windows 10.

  • Open Device Manager.
  • Find IDE ATA/ATAPI controllers from the list.
  • Right-click on the driver. Click on Update driver. Choose between both the options to start the installation automatically.

Standard SATA AHCI Controller Driver Windows 7 Download

Follow the steps below to update Standard SATA AHCI Controller Driver on Windows 7.

  • Open Device Manager.
  • Right-click on IDE ATA/ATAPI Controller.
  • Click Update driver.
  • Choose one from the two options to start the download and installation manually.
Standard SATA AHCI Controller Update

How Do I Install AHCI Drivers On Windows 10?

  • Type devmgmt.msc in the Run text box and press Enter.
  • Expand the category called IDE ATA/ATAPI controllers.
  • Right-click on every file listed on both of the sides and click on Update Driver.
  • Click Search automatically for updates. If this is not working for you, you can take the other option of manually locating the drivers that you downloaded earlier.
  • The automatic download and install process will begin.

Should I Update AMD SATA Controller?

You must keep your AMD SATA Controller up to date if you want your PC to function properly without any complications.

To Sum All Up

The Standard SATA AHCI Controllers are one of the most important components attached to your computer. Without this, your storage drive, or hard drive won’t be able to function. This connects your files to the OS. So always try to keep the controllers up to date in order to get the best performance of your PC.

We hope we have provided all the answers to your Standard SATA AHCI Controller Update-related questions. Now you can use them to have a better performance of your computer.

Read more- How To Share Audio On Discord

- Advertisement -spot_img

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest article